Home Repair Renovate
Our Repair/Renovate Products
FULLPROOF DAMP FREE
Recommended for waterproofing of roofs and external walls. Liquid applied cementitious membrane which provides excellent resistance to water pressure by forming highly elastic seamless coating over the applied concrete surfaces.
Benefits
- High performance,acrylic polymer modified cementitious waterproofing coating.
- Develops excellent bond with roof slab.
- Good elasticity to take care of movements.
- Protects from UV rays decrease temperature upto 5 to 8 oc
Dosage
- Consumption for 1000 sq.ft roof 50 kg
- Coverage area 18 -20 sq.ft /kg in 2 coats
FULLPROOF SWS SBR
FULLPROOF SWS SBR for waterproofing of sunken portions of toilets & bathrooms, chhajas, balconies & staircases
Benefits
- Improved flexibility, lower water cement ratio and high resistance to water penetration.
- Strengthens bond between new concrete to old concrete, plaster.
- Enhances strength & water resistance of repair mix – concrete & mortar.
Usage
- Prepare a slurry coat of FULLPROOF SWS SBR : Cement in the ratio of 1:1 by weight.
FULLPROOF CRYSTALINE WP
FULLPROOF CRYSTALINE WP is composed of high quality cement, properly selected & graded inert aggregates, proprietary waterproofing active chemicals & additives.
Benefits
- Application advantage – Does not require protective plaster, applicable over SSD & wet surface.
- Waterproofing – Stops water movement through concrete, becomes integral part of the structure.
- Corrosion – Protects reinforcing steel against corrosion.
- Sealing – Waterproofs minor cracking & seals shrinkage cracks up to 0.4 mm width.
- Permeability – Resists permeation of water from positive & negative side of the concrete.
- Chemical activation – It’s waterproofing capability increases with time. i.e. It remains permanently active.
- Abrasion – Does not get affected by surface wear or abrasion, once the penetration is complete.
- Hydrostatic pressure – Treated concrete withstands hydrostatic water pressure up to 15 metre head.
- Protection – Protects concrete against contaminated water & corrosion.
Usages
- Easy in application, only to be mixed with water at site. And apply with brush
- Direct use in concrete mix design for concrete structure.
FULLPROOF RUST CONVERTER
Fullproof Rust Converter is a fast drying, water based one-coat system (primer) that converts rusted surfaces to a hydrophobic passive layer and prevents further rusting thru the unique formulation of chelating agents.
Usages
- It is recommended to remove any loose rust prior to application.
- Fullproof Rust Converter can be applied by spray, roll, brush, or dip.
FULLPROOF TILE HARDNER COMPOUND
FULLPROOF HARDNER is an PCE Compound of a new generation based poly- carboxylic ether polymer with high early strength gains. It’s compatible with all kinds of cements.
Benefits
- FULLPROOF HARDNER is suitable for making precast concrete elements at all workability’s including Super Workable Concrete(paverblock, tiles, bricks) having fluid consistency.
- A low water binder ratio and consequently high early and ultimate strengths.
- Allows low water cement ratio to increase motar strength
USAGE
- Dosage of should be determined in trial mixes.
- Dosage range 0.5 to 1.2% of Cement
FULLPROOF CURING COMPOUND
FULLPROOF CURRING COMPOUND is a white, low viscosity acrylic emulsion which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non-penetrating continuous film immediately upon contact with a cementitious surface. This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability
Benefits
- Single Application: Forms moisture barrier for whole of the curing period.
- No other curing necessary: Eliminates use of water, hessian or sand, completely.
- Reliable: No risk of erratic or poor curing and ensures that cement hydrates efficiently.
- Ensures hard-wearing surface: Minimizes risk of drying shrinkage, cracks and dusty surfaces.
- Easy and Safe Spray Application: Non-toxic and nonflammable.
FULLPROOF POWER PLUS
FULLPROOF POWER PLUS is specially formulated integral liquid waterproofing compound composed of surface active plasticizing agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters.
Benefits
- Increase strength and compaction of concrete
- Waterproofs concrete during the construction stage.
- Improves workability.
- Avoids cracking.
- Protect concrete from corrosion.
- POWER PLUS should be used in concrete, plaster and mortar.
Application
- Mix 200 ml of POWER PLUS with every 50 kg bag of cement.
FULLPROOF CORROSION INHIBITOR
FULLPROOF CORROSION INHIBITOR is a hi-tech corrosion inhibitor system that works on the Bipolar Inhibition Mechanism inhibits corrosion of steel in concrete at both the poles, cathodic & anodic simultaneously.
Benefits
- Penetrates over a prolonged period and arrests corrosion of rusting steel.
- Non-toxic, eco-friendly.
- Non-deleterious unlike conventional rust converters.
- Effective even in the presence of high amount of chlorides.
- Does not affect bond strength of new concrete to reinforcement bars.
- Does not entrain air.
Usages
- The batch water shall be calculated accounting for the quantity of FULLPROOF CORROSION INHIBITOR to be added at 2 kgs per cubic meter